What Grit Sandpaper for Drywall
Drywall sanding is a essential step that determines the quality of your paint-ready surface. Even the most skilled joint compound application can seem imperfect if the sanding is not done properly. Knowing appropriate drywall sandpaper grit to use at different stages ensures that your surface becomes smooth and even. The process is based on finesse and proper grit selection.
When done correctly, drywall sanding levels joints, gets rid of ridges, and results in a flawless, professional-looking surface ready for painting.
Understanding Grit Numbers for Drywall
The grit number on sandpaper indicates how coarse or fine the abrasive surface is. A smaller number means the sandpaper is coarse and removes material quickly, while a finer number provides a smoother finish. Choosing the right drywall sanding grit prevents damage such as paper face scratches, deep scratches, or uneven patches.
If the grit is too coarse, it can damage the drywall paper or leave swirl marks that show up under paint. If it’s too fine too early, it can miss imperfections. The goal is to move in a stepwise progression of grits for a seamless finish.
Recommended Sandpaper Grit for Drywall Stages
Professional drywall finishers typically follow a three-stage grit progression to achieve optimal results:
• 100–120 grit: Best for the first sanding pass to remove high areas after joint compound application. This grit should be used lightly to prevent surface tearing.
• 120–150 grit: Perfect for blending seams once the major imperfections are removed. This grit provides the main surface refining phase.
• 180–220 grit: Finishes the surface for primer application. It creates a consistent surface without visible scratches.
This sequence ensures each layer of compound is smoothed correctly, resulting in a long-lasting wall.
Tools and Equipment for Sanding Drywall
Using proper tools is as important as selecting the right grit. Quality equipment helps maintain even pressure, reduces fatigue, and keeps dust under control.
Common tools include:
• Hand sander for detail work
• Telescopic pole sander for ceilings
• Fine sanding pads for tricky angles
• Sanding screens for better dust dispersion
• Dust mask or respirator for safety
• Angle light for better visibility
These tools help ensure smooth, uniform results without damaging the drywall paper.
Pro Techniques for Sanding Drywall
Sanding drywall is a careful process. Following professional techniques prevents visible defects and ensures your work looks flawless once painted.
1. Let the Joint Compound Dry Completely
Always wait for the compound to dry fully before sanding. Partially dried mud will smear and ruin your finish. Fully cured compound turns into fine dust when sanded, allowing for clean results.
2. Apply Light, Even Pressure
Avoid pressing too hard. Let the sandpaper do the work while maintaining steady strokes. Excessive pressure can create gouges.
3. Feather the Edges
Blend the what grit sandpaper for drywall compound joint compound smoothly into the drywall using light overlapping passes. Focus on edges rather than flat surfaces to create a smooth appearance.
4. Use Angled Lighting
Shine a light across the wall’s surface to highlight flaws that might not be visible head-on. This ensures all uneven areas are addressed before painting.
5. Switch to Finer Grit for Final Passes
Once the wall feels flat and smooth, move to 180–220 grit sandpaper. This stage polishes the surface and prepares the wall for the final coat.
How to Sand Drywall Corners
Corners and edges need careful sanding. Use a fine-grit sanding sponge or folded sandpaper to reach these areas. Sand one side at a time with controlled movement to avoid damaging the tape or paper.
For inside corners, a few light passes are usually enough to smooth transitions without thinning the surface material. Careful motion is the key to maintaining joint integrity.
What Not to Do When Sanding Drywall
Many DIY finishers make the mistake of being too aggressive or skipping crucial steps. To achieve a high-quality outcome, avoid the following:
• Cutting into the drywall surface
• Starting with too low a grit number
• Forcing the sandpaper into the wall
• Neglecting to check under light
• Not using protective gear
Steady control and gradual sanding matter more than speed during drywall sanding.
Final Steps Before Painting Drywall
Before applying paint, ensure that the wall is completely free from debris and fine powder. Wipe the surface with a slightly wet sponge or a vacuum attachment designed for drywall dust. Check all areas under good lighting to confirm a consistent finish. Using 180–220 grit sandpaper for drywall before painting ensures a smooth and receptive surface for primer adhesion.
A properly sanded wall allows primer and paint to bond evenly, preventing visible marks and ensuring a professional result.
Wrapping Up
Mastering the correct drywall sanding grit to use at each stage can significantly improve the quality of your walls. Start with medium grit to remove rough patches, move to finer grits for blending, and finish with ultra-fine sanding for that perfect surface.
By combining the right tools, lighting, and a steady approach, you can achieve a perfectly smooth drywall finish that looks seamless under any paint or lighting condition. Careful sanding and control are the true secrets to expert-level drywall finishing.